Home > PTFE Molding Powder >

80% Virgin PTFE Molding Powder SF-20PI With 20%±1% Polyimide

Product Categories

Sinof Hi-tech Material Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Name: 80 Virgin PTFE Molding Powder SF20PI With 201 Polyimide
Brand: Sinof
Price: 1 USD

Brand Name : Sinof

Model Number : SF-20PI

Place of Origin : China

Contact Now

PTFE Molding Powder (SF-20PI)

Composition: 80% virgin PTFE, 20%±1% polyimide

Technical Properties

Mechanical Properties	Units	Test Method	Free Flow	NFF
Specific Gravity	g/cm³	ASTM D4894	1.90±0.03	1.90±0.03
Tensile strength	MPa	ASTM D4894	≥12	≥15
Elongation at break	%	ASTM D4894	≥180	≥220
Bulk Density	g/L	ASTM D4894	650±50	/
Hardness	Shore D	NEEDLE	60-55	60-55
Diametric Shrinkage	%	INTERNAL	2.0±0.5	2.0±0.5
Flow	Sec/120g	INTERNAL	≤5	/
Average Particle Size	μm	ASTM D4894	550±100	/
Recommended Molding Pressure	350-400kg/cm²
Max Sintering Temp.	370-375℃

Attention:

This product is a fluoroplastic material. Normal precautions observed with fluoroplastics should be followed.

Packaging, Storage and Transportation:

1. The product is packed in two layers of plastic bags in a hard bucket with a net content of 25kg per barrel.

2. The products shall be transported as non-dangerous chemical. During transportation, prevent from humidity, intense vibration and package damage.

3. Products should be stored in a clean, cool and dry warehouse to prevent the mixing of dust, moisture and other impurities.

80% Virgin PTFE Molding Powder SF-20PI With 20%±1% Polyimide

Product Tags:

80% Virgin PTFE Molding Powder

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinof Hi-tech Material Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!